PLEASE NOTE: *** Make sure to select your desired retrofit components from the drop down menus below accordingly BEFORE CHECKOUT. The default price shown reflects the DEFAULT base product options! ***
G37C-R: A fully circular shroud with a large overall diameter perfect for filling out reflectors in bigger headlights. Inspired by the OEM Infiniti G37 Coupe Headlight. Following in the footsteps of many newer shroud designs, the G37C-R uses a two piece chromed plastic and acrylic internal diffuser that will glow when the light is turned on.
IN COMPARISON: Don't make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: Morimoto shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheap-o's out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off.
A OR B: At The Retrofit Source, we're also meticulous with quality control. If a shroud has a minor factory defect; we sell it at a discount as a "B stock" unit - which is perfect for budget retrofits or when painting them is part of the plans. If you won't settle for anything less than perfect and plan to leave them chrome; go for the "A Stock" Shrouds.
MOUNTING: Centric Rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the shroud to reduce the inside diameter, making them more of a "press fit" onto the lens holder of the projector. JB Quik Weld is also recommended in order to prevent the shrouds from vibrating loose over time.
LED HALOS: Are a unique and effective way to further customize the look of your projector retrofit. The all new Profile Pivot (switchback) and Profile Pixel (RGB) systems are easy to mount on the front of your shrouds, are reliable, and of course awesome looking. To determine which size is best for you - check out the size-guide in the "In Action" images section below. These shrouds feature DRL "eyelets" that will glow with light if you wanted to do something a bit different and mount the halos inside.
TRIMMING: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it's normal. Luckily, they're made of plastic - making that easily possible. We recommend a Dremel hand tool withEZ Lock cutting wheels to make the job easy.