BI-XENON: MORIMOTO MINI H1 STAGE III

$269.00
QTY:

PRODUCT DETAILS

PLEASE NOTE: *** Make sure to select your desired retrofit components from the drop down menus below accordingly BEFORE CHECKOUT. The default price shown reflects the DEFAULT base product options! ***

HIGH RANKING: For years now Morimoto's Mini H1 Stage III complete retrofit kit has been our most popular setup on the site. Not only is it the easiest to install, but due to the compact size of the Mini H1 projectors, it's the most universal - fitting in most every application. While Morimoto continues to enhance the performance of their Mini H1 with each new generation, it's also now one of the best performing kits in the catalog too.

MORIMOTO BI-XENON PROJECTORS: Morimoto's new Mini H1 7.0, was an instant winner upon launch. Representing the first full overhaul of the Mini H1 since their launch, it's one of the most advanced headlight projectors in the world today. Revised optics paired with a cast-curved cutoff shield produces one of the widest low beam patterns we've ever seen, and a high beam that will easily go the distance. Kuria Optic clear lenses maximize intensity throughout, and keep the cutoff line sharp, colorful, and attractive. New side-action solenoids are more than 3x stronger than the old and fussy vertically-sprung units. Result: Maximum light on the ground, zero glare to oncoming traffic.

SHROUDS: Basically, they're the trim piece that adds the finishing touch to your new headlight retrofit. They cover the projector after it’s installed to restore the factory-finished look inside the housings. With so many different shapes, sizes, and designs available, we really recommend picking one that suits the geometry inside of your headlights, and also your personal preference on how they look. Check out all of the projector shroud options we offer and take your pick!

HID BALLASTS: Morimoto’s XB ballasts are a functional work of art. While the industrial-edge design by California native Artur Saakyan looks great from the outside, they’re packed with too much modern tech on the inside to cover it all in on place. Their DSP 3.0 circuit maximizes reliability, input and output efficiency. Their ability to warm the bulbs up to full operating intensity quickly is matched by few. Aftermarket HID ballasts aren't all the same, and the XB’s make that clear in most every category in our opinion.

H1 HID BULBS: Homegrown by Morimoto to out-perform any alternatives on the market when installed in projector-based headlights…and it shows. We admit the latest generation XB HID bulbs are pretty impressive when compared to other bulbs, and even older Morimoto bulbs. At the heart of the XB bulbs is their perfectly-aligned 100% Philips quartz glass capsule that houses high quality halide salts from German-supplier Messer. In our annual lux comparison test, they produced nearly the same luminosity (intensity) as the industry benchmark Osram CBI bulbs at 5500K. No, you're not seeing things here, but yes you will be seeing everything at night.

WIRE HARNESS: As one of the most important parts in any HID lighting upgrade; don't skimp out when it comes to your wiring. It doesn't matter how good your ballasts are. How good your bulbs are. If your harness is a piece of crap, when it gives out your headlights are gonzo. Morimoto’s harnesses are the best on the market and easily worth their premium price compared to cheaper alternatives. No matter which one is right for your application, the harness features triple-sealed central relay packs, 14ga stranded copper wiring, over-molded fittings, and plug-n-play functionality. This will ensure everything properly (and permanently) works with your vehicle’s original in-cabin controls.

OPTIONAL PRECISION BULB HOLDERS: Designed by Morimoto in California, the new MotoHo1der utilizes a three-piece design that's way more effective but virtually no bigger overall than the old clip setup. The clever three-piece design provides even pressure on the back of the bulb, ensuring perfect alignment. To be honest, we think it's the single best upgrade to the projector that's ever been conceived since it helps make the most of the awesome 7.0's on the road. Well worth the extra few bucks in the grand scheme of things!

OPTIONAL CANBUS HARNESSES: Instead of a traditional relayed harness that draws power from the battery, Morimoto’s Standalone Canbus harnesses use two individual sub-harnesses to keep a load on the factory wiring. Recommended for vehicles that recognize when a bulb is out, these contain a series of capacitors and resistors to trick the car into thinking nothing has changed and help you avoid annoying "bulb out" warnings. We generally recommend them for use on most modern European applications instead of normal harnesses since they do a great job at providing stable power to the ballasts and canceling bulb out warnings.

OPTIONAL LED HALOS: Though LED halos may not be for everybody, if you’re looking for the cleanest, most simple, most reliable setup, we highly recommend the Profile Performance Pivot Halos. Not only are they the brightest, most uniformly lit halos currently on the market, but they double as a switchback turn signal with your blinker circuit. The integrated controllers are extremely easy to setup with only three wires (white, amber, and ground) and allow you to run the white mode continuously until interrupted by the signal – at which point they will blink amber. Once the signal stops, the Pivot ring will automatically switch back to its pure white mode.

OPTIONAL HOUSING SEALANT: Protection is priceless! When you're putting together a set of high-end headlights, the last thing you want is moisture in 'em the first time it rains outside. RetroRubber is the most effective way to make sure the original seal is fully restored. For the small price, why anybody wouldn’t prevent their new headlights from fogging up is beyond us. It’ll be the best twelve bucks you’ve ever spent.

OPTIONAL PRECISION BULB HOLDERS: Designed by Morimoto in California, the new MotoHo1der utilizes a three-piece design that's way more effective but virtually no bigger overall than the old clip setup. The clever three-piece design provides even pressure on the back of the bulb, ensuring perfect alignment. To be honest, we think it's the single best upgrade to the projector that's ever been conceived since it helps make the most of the awesome 7.0's on the road. Well worth the extra few bucks in the grand scheme of things!

WHAT'S INCLUDED

  • PROJECTORS: 2x Morimoto Mini H1 7.0
  • SHROUDS: 2x Your Preference
  • HID BALLASTS: 2x Morimoto XB35 AMP
  • H1 HID BULBS: 2x Morimoto XB
  • WIRE HARNESS: 1x Your Preference
  • WARRANTY: 5 Years (35w) or 3 Years (50w)
  • OPTIONAL PRECISION BULB HOLDERS: Morimoto MotoHo1ders
  • OPTIONAL HOUSING SEALANT: 1x Morimoto RetroRubber
  • OPTIONAL LED HALOS: 2x Profile Pivot

COMPATIBILITY

  • APPLICATIONS: Universal / Size Allowing
  • CAPABILITIES: Both Low & High Beam
  • PROJECTOR WIDTH: 104mm
  • PROJECTOR HEIGHT: 77mm
  • PROJECTOR DEPTH: 139mm (includes bulb holder)
  • PROJECTOR LENS: 2.5 Inches (diameter)
  • MOUNTING SHAFT: 20mm diameter (H4/H7 direct fit)
  • MINIMUM HOUSING DEPTH: 115mm
  • WIRE HARNESS: Match your original bulb size
  • SHROUDS: All styles (centric rings included if req'd)
  • LED HALOS: Varies according to shroud style
  • CERTIFICATIONS: Exceeds DOT requirements

TECH SPECS

  • OPERATING RANGE: -40C to +125C
  • XB BALLAST INPUT: 9-32VDC
  • XB BALLAST OUTPUT: 85VAC 35W
  • XB BALLAST MAX V: 25kV (at start-up)
  • XB35 BALLAST LIFESPAN: 2500 Hours
  • XB55 BALLAST LIFESPAN: 2000 Hours
  • 3000K BULBS: Golden Yellow (~2800 lm)
  • 4500K BULBS: Warm White (~3500 lm)
  • 5500K BULBS: Pure White (~3400 lm)
  • 6500K BULBS: Cool White (~3200 lm)
  • XB55 50W BALLASTS: Not Compatible